LGMS

Introducing LGMS Version 1.5

Over the past several months, a lack of shows gave the LGMS committee time to overhaul our standards document. Our goal was to clarify many of the rules, and remove some unnecessary restrictions. Many of the changes were tested out in May of 2021. Everything we tested proved to be successful, and we will highlight some of those changes here.

To start off, we removed the fraction from the rail height measurement. This new height of 32 inches proved to be much easier to remember during setup. We also added the requirement for adjustable height tables, as this proved to be much more stable while aligning modules and during operations. We tested a 3D printed foot piece at this show to provide a better system for levelling modules. These proved easy to adjust while under the full weight of a module, and were easy to extend or retract using a drill and socket attachment. This allowed tables with folding legs to reach the new height with only a few modifications. We plan to release these foot pieces soon, along with a more detailed guide for use.

Our goal with the new Module Specifications section was to allow a wide range of creativity in future modules. We clarified the module connections, and allowed for one or multiple connections to be included on a single module. This facilitates the creation of return loop and junction modules, or even this massive yard module with 4 connections to be created. This yard module proved to be very useful, as it provided a switching puzzle area and a path to reverse the direction of any train very easily.

The new LGMS V1.5 Standards are found on the Standards Page

There are more examples found in Appendix A of the standards but are but no means an exhaustive list.